Kawasaki, Assembly Instructions Teryx K R X 1000 Sport Front Bumper. 15 minutes, estimated assembly time, Text, set parking brake, turn off the ignition switch, Install the left and right mounting brackets to the vehicle bumper brackets using four M8 by 16 Hex bolts and four fender washers, leave loose
Place the front bumper into position, line up the holes with the mounting points of the vehicle and the brackets installed in the previous step, Install the two M10 bolts and two M10 nuts at the bottom of the bumper, finger tighten only
Screw the two remaining M8 x 16 bolts through the mounting brackets installed previously and into the front bumper, finger tighten only
Tighten all the bolts starting with the bottom bolts, torque, M8 bolts Newton-metres, 1.94 kilogram-force meters, 14 feet-pounds. Torque M10 bolts, 38 Newton-metres, 3.87 kilogram-force meters, 28 foot-pounds.
Kawasaki